Yonex Voltric 80 E-tune Badminton Racket

Ultra-lightweight racket with a solid feel and excellent power, the Black Micro Core technology is rigid with high-density vibration damping on the top side of the Voltric frame, allowing players to gain maximum power.

NANOPREME

By using an epoxy resin to blind graphite fibers together, NANOPREME is operating on a scale of less than one billionth of a meter. NANOPREME provides high resilience, stiffness and high repulsion from a single racket material for the first time.

TRI-VOLTAGE SYSTEM

Usually, extra weight on the top of the racket frame increases hitting power but causes loss of speed.

For the first time, Yonex with TRI-VOLTAGE SYSTEM successfully combines contradictory characteristics of extraordinary power and great handling. It develops a racket, which achieves combination of rapid racket handling and strong smashes.

Voltric is Power: Stiff racket structure at the top of the frame allows the head to bend in a very controlled way and to hold shuttlecocks on the string bed for longer. More energy is transferred to the shuttle because of the thin frame sides. Combination of that allows you to smash with flash power.

Voltric is Agility: In Voltric, to allow good handling while also maintaining good power, weight is balanced on the top of the frame and at the T-Joint area. Air resistance is reduced, and handling power is improved by the thin sides at the top of the head. Full swing can be performed during even short range rallies, as VOLTRIC responds instantly to even the most complex movements.

New Grommet Pattern

The single-pass grommet hole construction allows to implement more grommet holes for a more high-performance stringing pattern.

Solid Feel Core

Built in solid feel core cuts out harmful diverse vibrations during the impact. Solid feel core is implemented in all rackets manufactured in Japan.

E-TUNE

Aero+Box Frame

Combines solid hitting feel and fast swing.

NEW Built in T-joint

Built in T- Joint is produced from special lightweight plastic and it is combined with epoxy resin and foaming agent. It enhances the quality and performance by increased stability of the shuttlecock on the string bed and through air.

Isometric™

Square shaped ISOMETRIC frame shape is designed to keep vertical strings at similar length, as well as horizontal ones. This allows the racket to produce an expanded sweet spot in all directions.

T-Anchor

New composite material T- Anchor used in T-Joint helps to reduce excess torque when hitting an off-center shot.

ULTRA SLIM LONG SHAFT

By implementing NANOPREME into the racket shaft greater stability is achieved, compared to conventional rackets. While bending two rackets at the same force, racket with Ultra Slim Long Shaft rebounds almost twice as far as conventional racket does in the same time of 0.018 seconds. This result in 10% better stability compared to conventional rackets.

NANOMETRIC ™

NANOMETRIC* technology provides improved bonding strength in between the carbon fibers. This allows Yonex to take the racket shaft construction to another level by reducing amount of carbon used in the shaft to make it 60%* thinner than a conventional racquet whilst keeping the same stiffness. Yonex has developed a revolutionary lightweight racket with lightening head speed and precise control.

*NANOMETRIC is the new material which applies the NANOALLOYTM Technology of Toray Industries, Inc.

*approximate measurement when compared to a conventional racquet shaft, tested by YONEX

Control Support Cap

Control support cap provides 88% wider flat surface compared to ordinary racket. It enhances the easier gripping, sharp maneuverability and fast follow-through.